Holybro Micro M10 GPS — Without Case

The Holybro Micro M10 GPS is a compact, high-performance GNSS positioning module designed for FPV drones, multirotors, fixed-wing UAVs, VTOL aircraft, and autonomous systems.

Featuring the latest-generation u-blox M10 GNSS receiver, an integrated electronic compass, and multi-constellation satellite reception, the Micro M10 delivers reliable positioning in a lightweight design.

The Without Case version weighs just 14 g, making it ideal for UAV applications where weight and installation space are critical.

Key Features

u-blox M10 GNSS Receiver

Advanced GNSS technology providing fast satellite acquisition and reliable positioning.

Multi-Constellation Positioning

Supports GPS, Galileo, GLONASS, BeiDou, and QZSS, with up to four concurrent GNSS systems.

Integrated Electronic Compass

Features an IST8310 magnetometer for heading information and flight controller integration.

Compact & Lightweight

The caseless version measures just 32 × 26 × 9 mm and weighs approximately 14 g.

High Navigation Update Rate

Supports positioning updates up to 25 Hz with a single GNSS constellation or 10 Hz with four concurrent constellations.

Enhanced GNSS Reception

Features a ceramic patch antenna, low-noise amplifier, and RF signal amplification for improved satellite reception.

UART Communication

Supports UBX and NMEA protocols for integration with compatible flight controllers.

Multi-Constellation GNSS Positioning

The Micro M10 GPS supports the following satellite navigation systems:

• GPS: L1
• Galileo: E1
• GLONASS: L1
• BeiDou: B1
• QZSS: L1

By receiving signals from multiple constellations simultaneously, the module improves satellite availability and positioning reliability.

It also supports satellite augmentation systems, including EGNOS, WAAS, MSAS, and GAGAN.

Integrated Electronic Compass

The Micro M10 incorporates an IST8310 magnetometer, providing magnetic heading information to compatible flight controllers.

This allows the module to combine GNSS positioning and compass measurements in a compact unit.

Advanced Signal Reception

The module features a 25 × 25 × 4 mm ceramic patch antenna and a MAX2659ELT+ RF amplifier.

Its low-noise signal architecture helps maintain reliable satellite reception while minimizing power consumption.

Compact Design for UAV Integration

The Without Case version is particularly suitable for installations where space and weight are limited.

Dimensions: 32 × 26 × 9 mm

Weight: 14 g

Its compact design makes it suitable for FPV drones, fixed-wing UAVs, small multirotors, and autonomous robotics.

Flight Controller Compatibility

The Micro M10 GPS supports integration with compatible flight controllers running:

• ArduPilot
• PX4
• INAV
• Betaflight

Compatible firmware versions and appropriate GNSS configuration are required.

Technical Specifications

Product: Holybro Micro M10 GPS

Version: Without Case

Brand: Holybro

GNSS Receiver: u-blox M10

Compass: IST8310

Supported GNSS: GPS / Galileo / GLONASS / BeiDou / QZSS

Concurrent GNSS: Up to 4 Systems

Positioning Accuracy: 2.0 m CEP

Navigation Update Rate: Up to 25 Hz (Single GNSS) / 10 Hz (Four GNSS)

Output Protocols: UBX / NMEA

Default Baud Rate: 115200 bps

Input Voltage: 4.7–5.2 V DC

Power Consumption: <200 mA @ 5 V

Connector: JST-GH 6-Pin

Antenna: 25 × 25 × 4 mm Ceramic Patch

Antenna Gain: 1.5 dBi

LNA Gain: 22 dB

RF Amplifier: MAX2659ELT+

Operating Temperature: -40°C to +80°C

Dimensions: 32 × 26 × 9 mm

Weight: 14 g

Applications: FPV Drones / Multirotors / Fixed-Wing UAVs / VTOL / Autonomous Systems

What’s Included

• 1× Holybro Micro M10 GPS Module — Without Case
• 1× JST-GH 6-Pin Connector Cable — 15 cm
• 1× JST-GH 6-Pin Colored Silicone Cable — 15 cm

Flight controller and additional UAV accessories are sold separately.

This module provides standard GNSS positioning and does not support centimeter-level RTK positioning.

Ensure compatibility with your flight controller and firmware before installation.