V11130-55KV-IPC

Hobbywing V11130 55KV IPC VTOL Drone Motor \n The Hobbywing V11130 55KV IPC is a heavy-duty propulsion solution built for ultra-large VTOL UAVs. Featuring Intelligent Propeller Control (IPC), it combines massive thrust, advanced cooling, and industrial-grade durability, making it ideal for offshore inspection, logistics, and emergency response missions. \n \n Key Features \n Extreme Heavy-Lift Performance \n \n \n \n Maximum thrust: 63 kg per motor \n \n \n Recommended thrust per rotor: 35–40 kg \n \n \n Suitable for VTOL UAVs with MTOW 90–105 kg \n \n \n Thrust-to-weight ratio: up to 37.8 (motor weight 1,666 g) \n \n \n Intelligent Propeller Control (IPC) \n \n \n \n Seamlessly integrates with Hobbywing IPC ESCs \n \n \n Precisely stops propeller position during forward flight \n \n \n Reduces aerodynamic drag and vibration in fixed-wing mode \n \n \n Improves endurance and lowers power consumption in cruise \n \n \n Advanced Cooling & Efficiency \n \n \n \n 30% lower temperature rise under rated load compared to similar-class motors \n \n \n Built-in centrifugal fan and wide air outlets enhance cooling \n \n \n Full-throttle burst capability ensures safe stall recovery \n \n \n Durability & Industrial Protection \n \n \n \n Passed 48h neutral salt spray corrosion test (GB/T 10125-2012) \n \n \n Tested for water ingress, drive compatibility, and temperature extremes \n \n \n Steel mesh bracket and sealed bottom cover block dust and debris \n \n \n Premium Materials \n \n \n \n 200°C high-temperature enamelled winding \n \n \n 180°C high-grade permanent magnets \n \n \n 0.2 mm low-loss silicon steel sheets for magnetic efficiency \n \n \n Reinforced shaft and rotor bell with nickel-electrophoresis coating \n \n \n Industrial Applications \n \n \n \n Offshore wind farm and maritime inspections \n \n \n Search and rescue operations at sea \n \n \n Forestry and power line monitoring \n \n \n Hydrological surveys and emergency deployment \n \n \n Load Parameters (follow the order of our recommendations): The load parameters listed below follow the same order as the recommended propellers mentioned in this product description.